HOW TO USE:

application



1. Cleanse
Clean the nail surface with a wet cotton bud to remove dirt and grease on the nail surface.




2. Color
Using the'P' range water-based nail enamel, paint an even coat of color on the nail surface. Allow 45-60 seconds to dry. And an additional coat of color for a fuller body, but ensure that the underlying layer is throughly dry before doing so.




3. Design
Using the pencil-tip of the Aqmore cuticle stick, design your favorite patterns with other colors of the 'P' range nail enamel. Error may be wiped off easily with a piece of wet tissue or cotton bud without affecting the dried base color coat.




4. Glamorize
Using the pencil-tip, carefully extract the special glitters in the 'C' range topcoats and place them accordingly on the nail surface.




5. Color Seal
Seal in the nail colors with a single coat of the water-proofing 'C' range clear/glittered topcoats. Allow 2 to 3 munites to dry.


removal



1. Dip
Dip fingers in warm water for 20-30 seconds




2. Dislodged
Using the finger nail tips, gently lift up the coat of nail enamel from the edges of the nail surface.




3. Peel off
Peel off the nail enamel once the edges have been successfully dislodged.




4. Removed and Done
Done and completely removed like a mask, apply the nail essence / cream evenly on the nail surface to nourish and moisture the nails.



FAQ:

1. How do I ensure that the nail color lasts?

To ensure optimal product performance, AQMORE’s water-based nail enamels MUST be used together with AQMORE’s protective top coats, to seal in the nail color and prevent it from peeling easily. Once protected, the nail color can last from 5 days or more, depending on the kind of the activity that it is exposed to.

Tip: To prevent the nail color from chipping at the tips, apply the topcoat over the edges your nails, as well as slightly underneath the nail surface to seal in the color.


2. Can I use other brands of topcoats instead?

No. To ensure that the peel-off removal works, AQMORE’s water-based nail enamel must be used with the AQMORE line of topcoats.
The lastingness of the nail color cannot be guaranteed if you seek to use other brands of topcoats.

Tip: You may consider using AQMORE’s glitter topcoats over your conventional nail polishes for different color effects; the only difference is that you would still need to use nail polish remover to clean off the enamel, instead of peeling it off.


3. How do I create my own colors?

Simply transfer the colors that you would like to blend together onto an external palette, in any portion that you desire, and mix well.
Using the sharp end of the nail art pencil, you may dap on the colors from the palette and create your drawings.
Note: As these blended colors are exposed to the atmosphere, they tend to dry up in 10 minutes if not put in use.


4. How do I affix stars and glitters on the nail surfaces?

Once the base layer has dried, apply a layer of clear topcoat. The wet layer of topcoat will act as an adhesive for you to attach any stars or glitters.
Once the lower layer of topcoat has dried, apply another layer of topcoat over the stars and glitters to seal them to the nail surface.


5. How can I decorate my mp3 player or mobile phone?

Same as for nail art, transfer the enamel onto an external palette. Dap the sharp end of the nail art pencil with the color and draw accordingly. Errors may be wiped off with a wet tissue. Allow to dry for 20-30 minutes.

Note: Do not apply any topcoat to the color, as this will make removal difficult.


6. How do I remove the drawings on my mp3 player or mobile phone?

Apply slightly pressure over the drawing with a moist piece of cloth or tissue any slowly dislodge from the edges with the cloth or tissue. Once sufficiently dislodged, you may peel off the drawing in one swift action.
Note: Do not attempt to scratch the drawings with sharp objects e.g. finger nails or rulers, as this may cause permanent scratch marks on your items.


7. How would I know whether the item that I would like to decorate is compatible with AQMORE’s enamel?

AQMORE’s enamel are suited for decoration on all smooth, flat, PVC surfaces. If you unsure about the compatibility, you may experiment by using the enamel to make a small dot on an inconspicuous area. Allow the color to dry and then peel off.

-----------------------------

interested?

for more enquiries, email
ORGANIC-BREADCRUMBS@HOTMAIL.COM !

photo credits: http://aqmore.com.my

Labels: aqmore